Product Description:
MCR 3-way isolating amplifier, for electrical isolation of analog signals, with screw connection, input signal: 0 V ... 10 V, output signal: 0 mA ... 20 mA
Technical Info
GTIN
: 04046356100656
Series
: MINI MCR-SL-U-I-O
Type
: Scheidingsversterker
Key Features
- MCR 3-way isolating amplifier
- for electrical isolation of analog signals
- with screw connection
- input signal: 0 V ... 10 V
- output signal: 0 mA ... 20 mA
Advantages
• Power supply possible via the foot element (TBUS)
• Low power consumption
• Entry-level alternative to configurable signal conditioners
• Highly-compact isolating amplifier for electrical isolation, conversion, amplification, and filtering of standard analog signals
• 3-way isolation
• Fixed signal combinations
Training Data Goes here
Dimensions
Width
6.2 mm
Height
93.1 mm
Depth
101.2 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 65 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Maximum altitude
≤ 2000 m
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Degree of protection
IP20
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Input data
Number of inputs
1
Configurable/programmable
no
Voltage input signal
0 V ... 10 V
max. input voltage
30
Input resistance of voltage input
approx. 100 kΩ
Output data
Number of outputs
1
Current output signal
0 mA ... 20 mA
Max. output current
28
Load/output load current output
≤ 500 Ω
Ripple
< 20 mVPP (at 500 Ω)
Power supply
Nominal supply voltage
24
Supply voltage range
19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Max. current consumption
< 28 mA
Power consumption
< 600 mW
Connection data
Connection method
Screw connection
Stripping length
12
Screw thread
M3
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 12
General
No. of channels
1
Maximum transmission error
≤ 0.1 % (of final value)
Maximum temperature coefficient
< 0.01 %/K
Temperature coefficient, typical
< 0.002 %/K
Limit frequency (3 dB)
approx. 100 Hz
Step response (10-90%)
approx. 3.5 ms
Electrical isolation
Basic insulation according to EN 61010
Overvoltage category
II
Degree of pollution
2
Rated insulation voltage
30
Test voltage, input/output/supply
1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Color
green
Housing material
PBT
Mounting position
any
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
EMC data
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
Typical deviation from the measuring range final value
5
Designation
Fast transients (burst)
Standards/regulations
EN 61000-4-4
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Standards and Regulations
Connection in acc. with standard
CUL
Standards/regulations
EN 61000-4-2
Standards/regulations
EN 61000-4-5
Conformance/approvals
Designation
CE
Certificate
----
Designation
UL, USA/Canada
Identification
UL 508 Recognized
Identification
Class I, Div. 2, Groups A, B, C, D T4
Designation
Shipbuilding approval
Certificate
DNV GL TAA000020N
Temperature
B
Humidity
B
Vibration
B
EMC
A
Enclosure
Required protection according to the Rules shall be provided upon installation on board
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
