
GTIN
: 04046356092432
Series
: HC-B 24-I-UT-F
Type
: Contactblok
Key Features
- HEAVYCON female insert
- B24 series
- 24-pos.
- screw connection
Advantages
• For fast coding with plastic profile
• For test pin 2 mm
Training Data Goes here
General
Note
for flexible conductors with or without ferrules
Note
Connectors may be operated only when there is no load/voltage.
Connection method
Screw connection
Tightening torque
0.5 Nm ... 0.8 Nm
Torque
0.8 Nm ... 1.2 Nm (PE connection)
Torque
0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing)
Screwdriver blade
0.5 x 3.5 mm
Number of connections per position
1
Degree of pollution
3
Overvoltage category
III
Number of positions
24+PE
Insertion/withdrawal cycles
≥ 500
Size
B24
Size
B48
Contact numbering
1 - 24
Conductor cross section
0.5 mm² ... 2.5 mm²
Connection cross section AWG
20 ... 14
Stripping length of the individual wire
8
Assembly instructions
To ensure correct use, installation in housing with IP54 protection or better is required
Ambient conditions
Ambient temperature (operation)
-40 °C ... 125 °C (including heating up of contacts)
Material data
Contact material
Copper alloy
Contact surface material
Ag
Contact carrier material
PC
Standards/regulations
PC: Fire protection in rail vehicles - requirement sets R22 and R23 acc. to DIN EN 45545-2 (Risk level HL1 - HL2)
Standards/regulations
PC: Fire protection in rail vehicles - requirement set R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Electrical characteristics
Rated voltage (III/3)
500
Rated surge voltage
6
Rated current
16
Standards and Regulations
Connection in acc. with standard
CSA
Constructional and testing regulations
DIN EN 61984
Constructional and testing regulations
DIN EN 60664
Constructional and testing regulations
IEC 60352
Flammability rating according to UL 94
V0
Standards/regulations
acc. to DIN EN 45545-2
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
China RoHS
No hazardous substances above threshold values