
Product Description:
Communications processor CP 5623 PCI Express X1 (3, 3V) for connection to PROFIBUS; incl. DP-Base software, NCM PC: DP-RAM interface for DP master incl. PG and FDL protocol, Single license for 1 installation, Runtime software, Class A; software and electr. manual on CD-ROM, 2 languages (de, en) ; Operating system support see SIMATIC NET software

GTIN
: 04019169188609
Series
: Communications processor CP 5623 PC
Key Features
- Communications processor CP 5623 PCI Express X1 for connection to PROFIBUS
- incl
- DP-Base software
- NCM PC: DP-RAM interface for DP master incl
- PG and FDL protocol
- Single license for 1 installation
- Runtime software
- Class A
- software and electr. manual on CD-ROM
- 2 languages
- Operating system support see SIMATIC NET software
Advantages
• PCI Express card (PCIe x1) with internal microprocessor for connecting PCs and SIMATIC PG/PC to PROFIBUS at up to 12 Mbps
• Extensive diagnostics options for installation, commissioning and operation of the module
• Event and filter mechanism for reducing the load on the host CPU
• Multiprotocol operation and parallel operation of up to four CPs
• The appropriate OPC servers and configuration tools are included in the scope of supply of the respective communication software
• An open visualization system
• Offers the option of connecting the most diverse control systems.
Training Data Goes here
transfer rate
transfer rate
----
● at the 1st interface / acc. to PROFIBUS
9.6 kbit/s ... 12 Mbit/s
Interfaces
number of electrical connections
----
● at the 1st interface / acc. to PROFIBUS
1
type of electrical connection
----
● at the 1st interface / acc. to PROFIBUS
9-pin Sub-D socket (RS 485)
supply voltage, current consumption, power loss
type of voltage / of the supply voltage
DC
supply voltage
----
● 1 / from backplane bus
3.3 V
● 2 / from backplane bus
12 V
relative symmetrical tolerance / at DC
----
● at 3.3 V
9 %
● at 12 V
8 %
consumed current
----
● 1 / from backplane bus / at DC / maximum
0.72 A
● 2 / from backplane bus / at DC / maximum
0.25 A
power loss [W]
5.4 W
Ambient conditions
ambient temperature
----
● during operation
5 ... 60 °C
● during storage
-20 ... +60 °C
● during transport
-20 ... +60 °C
relative humidity / at 25 °C / without condensation / during operation / maximum
85 %
protection class IP
IP00
design, dimensions and weights
module format
PCI Express x1 (half length)
width
21.6 mm
height
126.3 mm
depth
180.5 mm
net weight
102 g
product features, product functions, product components / general
number of plug-in cards of same design / plug-in / per PC station
4
number of units / note
FMS-5613 supports up to two CP 5603 / CP 5613 A2 / CP 5614 A2 / CP 5623 / CP 5624 processors
performance data / open communication
software / for open communication / by means of SEND/RECEIVE / required
FDL driver included in scope of delivery of the CP
number of possible connections / for open communication / by means of SEND/RECEIVE / maximum
80
performance data / PROFIBUS DP
software / for DP master function / required
No
service / as DP master
----
● DPV0
Yes
● DPV1
Yes
● DPV2
Yes
number of DP slaves / on DP master / operable
124
data volume
----
● of the address range of the inputs / as DP master / total
30256 byte
● of the address range of the outputs / as DP master / total
30256 byte
● of the address range of the inputs / per DP slave
244 byte
● of the address range of the outputs / per DP slave
244 byte
● of the address range of the diagnostic data / per DP slave
244 byte
software / for DP slave function / required
No
service / as DP slave
----
● of the address range of the inputs / as DP slave / total
244 byte
● of the address range of the outputs / as DP slave / total
244 byte
performance data / FMS functions
software / for FMS communication / required
Yes, FMS-5613
number of possible connections / for FMS connection / maximum
40
performance data / S7 communication
software / for S7 communication / required
Yes, HARDNET-PB S7 (S7-5613)
number of possible connections / for S7/PG communication / maximum
50
performance data / multi-protocol mode
number of active connections / with multi-protocol mode
50
number of configurable connections / per PC station
207
product functions / management, configuration, engineering
configuration software / required
Included in scope of supply
product functions / diagnostics
product function
----
● port diagnostics
Yes
standards, specifications, approvals
standard
----
● for EMC
2004/108/EC
● for safety / from CSA and UL
CAN/CSA C22.2 & UL 60950-1
● for emitted interference
EN 61000-6-3, EN 61000-6-4
● for interference immunity
EN 61000-6-1, EN 61000-6-2
certificate of suitability
----
● CE marking
Yes
● C-Tick
Yes
There is no certificate available for this product.