
Product Description:
Bus system connector, PROFIBUS, INTERBUS, 5-position, shielded, Socket straight M12, Coding: B, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg11, external cable diameter 8 mm ... 10 mm

GTIN
: 04046356523356
Series
: SACC-M12FSB-5CON-PG9 SH XL PB
Type
: Dataconnector
Key Features
- Bus system connector
- PROFIBUS
- INTERBUS
- 5-position
- shielded
- Socket straight M12
- Coding: B
- Screw connection
- knurl material: Zinc die-cast
- nickel-plated
- cable gland Pg11
- external cable diameter 8 mm ... 10 mm
Advantages
• Safe use in the field, thanks to a high degree of protection
• Flexible: connectors for on-site assembly
• Screw connection: proven connection technology for a large selection of different conductors
• Reliable signal transmission - 360° shielding in environments with electromagnetic interference
Training Data Goes here
Dimensions
Wrench size, union nut
16
Diameter housing
20.2 mm
Length
57
External cable diameter
8 mm ... 10 mm
Stripping length of the sheath
35
Stripping length of the individual wire
5
Ambient conditions
Ambient temperature (operation)
-40 °C ... 85 °C (Plug / socket)
Degree of protection
IP67
General
Note
NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Rated current at 40°C
4
Rated voltage
48 V AC
Rated voltage
60 V DC
Number of positions
5
Insulation resistance
≥ 100 MΩ
Coding
B - inverse
Standards/regulations
M12 connector IEC 61076-2-101
Signal type/category
PROFIBUS
Signal type/category
INTERBUS
Status display
No
Overvoltage category
II
Degree of pollution
3
Connection method
Screw connection
Conductor cross section
0.25 mm² ... 0.75 mm² (without ferrule)
Conductor cross section
0.14 mm² ... 0.75 mm² (with ferrule)
Conductor cross section
0.25 mm² ... 0.75 mm² (solid)
Conductor cross section AWG
24 ... 18 (without ferrule)
Conductor cross section AWG
26 ... 20 (with ferrule)
Insertion/withdrawal cycles
≥ 100
Torque
0.4 Nm (M12 knurl)
Torque
0.2 Nm (Screw terminal blocks)
Torque
1 Nm ... 1.4 Nm (Pressure nut with 8 mm ... 12 mm external cable diameter)
Tightening torque
Screw plug insert with sleeve housing as far it will go
Assembly instructions
The wires can be connected both with ferrules and without ferrules
Material
Flammability rating according to UL 94
V0
Contact material
CuZn
Contact surface material
Au
Contact carrier material
PA
Material of grip body
Zinc die-cast, nickel-plated
Material, knurls
Zinc die-cast, nickel-plated
Sealing material
NBR
Standards and Regulations
Standards/specifications
M12 connector IEC 61076-2-101
Connection in acc. with standard
CUL
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years