Product Description:
Feed-through terminal block with bolt connection method, cross section: 0.1 - 6 mm², AWG: 26 - 10, width 9 mm, color: gray
Technical Info
GTIN
: 04046356534802
Series
: RSC 4-F/6
Type
: Boutaansluitklem
Key Features
- Feed-through terminal block with bolt connection method
- cross section: 0.1 - 6 mm²
- AWG: 26 - 10
- width 9 mm
- color: gray
Advantages
• Mounting on standard DIN rails or directly in control boxes
• Large-surface, consistent external and center labeling
• Compact screw connection of ring and fork-type cable lugs
• Cover profile that can be snapped directly onto the terminal blocks provides touch-proof protection
• Screw nuts and current bars are latched in the insulating housing and cannot be removed
• The isolator bridge bar supports switchable cross connections; the bridge screw therefore has the function of a live contact
• Bridge shaft for potential distribution using standard screw bridges
Training Data Goes here
General
Number of levels
1
Number of connections
12
Potentials
6
Nominal cross section
4
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
1.02 W
Maximum load current
32
Nominal current IN
32
Nominal voltage UN
800
Open side panel
Yes
Relative insulation material temperature index (Elec., UL 746 B)
130
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
71.8 mm
Length
53.3 mm
Height
37
Pitch
9
Connection data
Connection
1
Connection method
Bolt connection
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Connection in acc. with standard
IEC 60947-7-1
Cable lug connection according to standard
DIN 46234:1980-03
Min. cross section for cable lug connection
0.1 mm²
Max. cross section for cable lug connection
6
AWG min
26
AWG max
10
Hole diameter, min.
4.3 mm
Cable lug width, max.
8
Bolt diameter
4
Screw thread
M4
Tightening torque, min
1.2 Nm
Tightening torque max
1.4 Nm
Cable lug connection according to standard
DIN 46237:1970-07
Min. cross section for cable lug connection
0.5 mm²
Max. cross section for cable lug connection
2.5 mm²
Ambient conditions
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
China RoHS
No hazardous substances above threshold values
CAD Data
