
Product Description:
AC charging controller in accordance with IEC 61851-1, master for load distribution to up to 5 slaves, OCPP 1.6J via 3G modem, Modbus/TCP via Ethernet, connection for RFID reader and energy meter via RS-485, DC residual current monitoring, connector release in case of power failure

GTIN
: 04055626503974
Series
: EV-CC-AC1-M3-CBC-RCM-ETH-3G
Type
: AC-laadregeling
Key Features
- AC charging controller in accordance with IEC 61851-1
- master for load distribution to up to 5 slaves
- OCPP 1.6J via 3G modem
- Modbus/TCP via Ethernet
- connection for RFID reader and energy meter via RS-485
- DC residual current monitoring
- connector release in case of power failure
Training Data Goes here
Product definition
Application
AC charging controller for private and commercial applications (EU/CN)
Standards/regulations
IEC 61851-1
Charging mode
Mode 3, Case B + C
Number of supported charging points
1
Locking release in the event of mains failure
Integrated release function of the locking actuator for disconnection of Infrastructure Plug and Infrastructure Socket Outlet
Conformance
CE-compliant
Dimensions
Height
90
Width
162
Depth
61.00 mm
Device supply
Supply voltage
230
Supply voltage range
100 V AC ... 240 V AC (nominal voltage range)
Nominal power consumption
< 3 W (No-load)
Power consumption
< 10 W (maximum)
Frequency range
50 Hz ... 60 Hz
Measuring range of the residual current
Rated frequency fn
≤ 2000 Hz
Nominal differential current
± 300 mA
Residual current IΔn
30 mA (AC)
Residual current IΔn
6 mA (DC)
Tripping time for IΔn
< 180 ms
Rated current In
32 A (Three-phase, 4x6 mm²)
Rated current In
48 A (Single-phase)
Response time for 2 x IΔn
< 70 ms
Tripping time for 5xIΔn
< 20 ms
Measuring current transducer
Connection method
Connector
Diameter of measuring coil
15
Switching outputs
Control of charging contactor
Relay output C1.2
Minimum switching capacity
4000
Maximum switching voltage
250 V AC (External supply)
Max. switching current
16
Control of locking actuator
Motor switching output
Maximum switching voltage
12 V (Internal supply)
Max. switching current
1 A (maximum)
Inputs
Number of digital inputs
5
Description of the input
Digital input
Nominal current IN
≤ 4 mA
Nominal input voltage UN
12
Input voltage range U1
0 V ... 3 V (Off)
Input voltage range U2
9 V ... 15 V (On)
RS-485 data interfaces
Number of interfaces
1 (for energy measurement device and RFID reader)
Bus system
RS-485
Connection method
Screw connection
Number of supported devices
2
Transmission speed
4.8 kbps ... 115.2 kbps (adjustable)
Protocols supported
Modbus/RTU (Master)
Ethernet data interfaces
Number of interfaces
1
Connection method
RJ45 jack
Transmission speed
10/100 Mbps
Transmission length
100
Protocols supported
Modbus/TCP
Number of slaves
max. 5
Wireless interfaces
Interface description
HSPA/GSM/GPRS/EDGE cellular interface for communicating with higher-level management systems using the OCPP 1.6J communication protocol
Frequency
900 MHz (HSPA)
Frequency
2100 MHz (HSPA)
Frequency
850 MHz (GSM/GPRS/EDGE )
Frequency
900 MHz (GSM/GPRS/EDGE )
Frequency
1800 MHz (GSM/GPRS/EDGE )
Frequency
1900 MHz (GSM/GPRS/EDGE )
Impedance
50
Transmission power
2 W (GSM 850 (Class 4))
Transmission power
2 W (GSM 950 (Class 4))
Transmission power
1 W (GSM 1800 (Class 1))
Transmission power
1 W (GSM 1900 (Class 1))
Transmission power
+ 24 old TXBdBm (UMTS/HSPA (Class 3))
Antenna connection
1
Antenna connection
SMA (male)
SIM card
Micro-SIM
Protocols supported
OCPP 1.6J
Ambient conditions
Ambient temperature (operation)
-25 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Max. altitude
< 2000 m
Permissible humidity (operation)
30 % ... 95 % (non-condensing)
Degree of protection
IP20
Degree of pollution
2 IEC 60664-1
Connection data
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section solid
0.2 mm² ... 4 mm²
Conductor cross section AWG
24 ... 12
Conductor cross section flexible
0.2 mm² ... 1 mm²
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Conductor cross section AWG
26 ... 16
EMC data
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Noise emission
EN 61000-6-3
Noise immunity
EN 61000-6-2
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Housing
DIN 43880
Mounting
Mounting position
any
Assembly instructions
DIN rail mounting
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50 years
There is no certificate available for this product.
Prod.-Id. 108191: UM EN EV-CC-AC1-M3-CBC-RCM-ETH Installing and starting up the EV Charge Control charging controller
(Manual Data,2 MB ,pdf)
Download