Product Description:
MCR head-mounted temperature transducers, programmable, intrinsically safe, for resistance thermometers, thermocouples, resistance-type sensors and voltage sensors. For Pt 100 resistance thermometers
Technical Info
GTIN
: 04017918893231
Series
: MCR-FL-HT-T-I-Ex
Type
: kopmeetwaardeomvormers
Key Features
- MCR head-mounted temperature transducers
- programmable
- intrinsically safe
- for resistance thermometers
- thermocouples
- resistance-type sensors and voltage sensors
- For Pt 100 resistance thermometers
Advantages
• Input for resistance thermometers, thermocouples, and linear mV signals, Ex ia IIC
• Configuration via software
• Can be installed in zone 0
• 2-way electrical isolation
• Loop-powered
• 1-channel
• Output: 4 ... 20 mA/20 ... 4 mA
Training Data Goes here
Ambient conditions
Ambient temperature (operation)
-40 °C ... 55 °C
Degree of protection
IP00
Degree of protection
IP66 (Installed in the connection head)
Input data
Configurable/programmable
Yes, programmable
Sensor types (RTD) that can be used
Pt, Ni (100, 500, 1000); min. measurement range 10 K
Sensor types that can be used (TC)
B, C, D, E, J, K, L, N, R, S, T, U; min. measurement range 50 K/500 K
Connection technology
2-, 3-, 4-conductor
Input signal range
10 Ω ... 400 Ω (min. measurement range 10 Ω)
Input signal range
10 Ω ... 2000 Ω (min. measurement range 100 Ω)
Input signal range
-10 mV ... 100 mV (min. measurement range 5 mV)
Output data
Current output signal
4 mA ... 20 mA
Current output signal
20 mA ... 4 mA
Max. current output signal
≤ 25 mA
Output current with short-circuit
≤ 3.6 mA or ≥ 21 mA (adjustable, not for thermocouples)
Output current with wire break
≤ 3.6 mA or ≥ 21 mA (adjustable)
Output current range with overrange/underrange
3.8 mA ... 20.5 mA (linear increase/decrease)
Load/output load current output
≤ 720 Ω (For UV = 24 V; Usupply - 8 V / 0.025 A)
Configurable/programmable
no
Power supply
Designation
Loop-powered
Supply voltage range
8 V DC ... 30 V DC
Max. current consumption
< 3.5 mA
Connection data
Connection method
Screw connection
Stripping length
8
Screw thread
M3
Conductor cross section solid
0.2 mm² ... 1.75 mm²
Conductor cross section flexible
0.2 mm² ... 1.75 mm²
Conductor cross section AWG
24 ... 15
Torque
0.5 Nm ... 0.6 Nm
pluggable
no
General
Step response (10-90%)
< 2 s
Switch-on delay
6
Configuration
Using MCR-PI-CONF-WIN configuration software package
Standards/regulations
NAMUR recommendation NE 21
Housing material
Polycarbonate, PC
Color
green
Line monitoring
NE 43
Safety data
Max. output voltage Uo
8.2 V DC
Max. output current Io
4.6 mA
Max. output power Po
9.35 mW
Max. ambient temperature
Category 1: T4 = 60°C, T5 = 50°C, T6 = 40°C
Group
IIB
Max. external inductivity Lo
8.5 mH
Max. external capacitance Co
1.9 µF
Group
IIC
Max. external inductivity Lo
4.5 mH
Max. external capacitance Co
974
Safety-related maximum voltage Um
250
Standards and Regulations
Conformance
CE-compliant
ATEX
II 1 G Ex ia IIC T6/T5/T4
UL, USA/Canada
cULus
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
China RoHS
No hazardous substances above threshold values
EC type-examination certificate (pdf5 MB)
LinkThere is no accessory available for this product.
